Difference between revisions of "Roland GK-2A Guitar Synthesizer Driver"

MuseWiki, wiki for the band Muse
Jump to navigation Jump to search
Line 6: Line 6:
== Bellamy's GK-2A ==
== Bellamy's GK-2A ==


[[Matthew Bellamy]] had the GK-2A installed on top of the [[Parker Fly]] and the two [[Gibson SG|Gibson SG]]. The GK-2A was used with the [[Roland VG-8 V-Guitar System]] alongside the [[Roland GC-10]].
[[Matthew Bellamy]] had the GK-2A installed on top of the [[Parker Fly]] and the two [[Gibson SG|Gibson SG]]'s. The GK-2A was used with the [[Roland VG-8 V-Guitar System]] alongside the [[Roland GC-10]].


{{Backto|Guitar effects}}
{{Backto|Guitar effects}}
[[Category:Gear]]
[[Category:Gear]]

Revision as of 17:01, 21 September 2020

Roland GK-2A Guitar Synthesizer Driver

The Roland GK-2A is a hexaphonic pickup/synth driver, designed to drive Roland guitar synths. It consists of six tiny pickups (one for each guitar string) and an on-board synth module, and sends six parallel analogue signals to an apropriate receiver, using the 13-pin 'GK' cable. The GK-2A can be connected to Roland's GK devices like VG-88, VG-8, GR-33, GR-30, GI-10, BOSS Twin Pedals and other 13-pin compatible products.

The GK-2A is often refered to as a 'MIDI pickup' - this is partialy true, as it does transmit patch-change and volume-control MIDI signals. However, the guitar signal itself is analogue, not MIDI; it requires an external processing unit (such as the Roland GI-20P) to be converted to MIDI.

Bellamy's GK-2A

Matthew Bellamy had the GK-2A installed on top of the Parker Fly and the two Gibson SG's. The GK-2A was used with the Roland VG-8 V-Guitar System alongside the Roland GC-10.


Go back to Guitar effects